Extremely easy flowing grade for very thin-walled moldings with difficult flow path to wall thickness ratios and very short cycle times.
|Ultraform® W2320 0035 UN
Very easy to free-flowing, fast-curing grade for extremely difficult to machine applications requiring less mechanical properties.
|Ultraform® W2320 003
Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical properties are lower.
|Ultraform® S2320 FC AQUA
ULTRAFORM® S2320 FC AQUA UN is applicable for plastic parts, where the approvals of material for drinking water contact and direct food contact is a mandatory requirement.
|Ultraform® S2320 003
Easy flowing and rapidly freezing grade for injection molding difficult, thin-walled parts.
|Ultraform® S1320 003
Free-flowing, rapidly solidifying grade for moldings difficult to produce by injection molding and having low wall thickness; increased stiffness and heat distortion resistance.
|Ultraform® S1320 0021
Free-flowing, rapidly solidifying grade with increased stiffness and heat distortion resistance.
|Ultraform® N2720 M63
Mineral-reinforced material for low-warpage moldings with high stiffness, strength and hardness.
|Ultraform® N2720 M210
Grade with enhanced stiffness and strength as well as good wear properties, e.g. used for conveyor belts and transportation systems.
|Ultraform® N2650 Z6 UN
Ultraform® N 2650 Z6 is a polyoxymethylene (POM) copolymer product.